Peerless-av WL-SR560M-200 - Installation User Manual download pdf (Page 5)

5 of 19

ISSUED: 08-24-12 SHEET #: 180-9037-2 10-30-12

M5 x 25 mm (4)

520-1122

M4 x 12 mm (6)

510-1079

M4 x 25 mm (4)

510-1082

M5 x 12 mm (4)

520-1064

M6 x 12 mm (4)

520-1050

M6 x 25 mm (4)

520-1211

I.D. .22" (5.6 mm) (4)

540-1057

multi-washer (6)

580-1036

I.D. .34" (8.7 mm ) (4)

540-1059

M6 x 20 mm (4)

520-9554

M6 x 30 mm (4)

520-1067

M8 x 15 mm (6)

520-1068

M8 x 40 mm (4)

520-1152

M8 x 25 mm (4)

520-1101

Security Adapter Bracket Fasteners

ISSUED: 06-12-12 SHEET #: 180-9023-1

User Manual and Installation Guide

Pro Wireless Multimedia Kit

Models:

HDS200

HDS200-2

HDS200-3

HDS200-4

READY

Step 7 While turning on the display device the HD Flow Pro Wireless Multimedia units will be going through the startup process. This process may

take up to two minutes to complete. The Power/Link indicator lights on the Transmitter and the Receiver will be ﬂashing at ﬁrst. Flashing indicates

that the units are establishing a secure connection. Wait until the connection is successfully established, indicated by the Power/Link indicator

light becoming solid.

Minutes

1 x Transmitter

1 x Receiver

2 x Stand

1 x Remote Control

1 x IR Flasher

1 x IR Extender

1 x Component Adaptor

2 x Power Adapter

1 x Quick Start Guide

1 x Users Manual

Step 2 Connect the provided IR Flasher to the IR-OUT port on the Transmitter.

Find the location of the IR window on your source device and adhere the

IR Flasher eye directly over the IR window on your source device.

NOTE: One IR Flasher eye is to be used for one component device.

Step 4 Install the IR Extender by plugging in the provided IR Extender in to

the IR-IN port on the Receiver and adhering the other end of the IR Extender

to a vertical surface near the output device. Ensure that the IR Extender is in

a line of sight to the remote control that controls your source devices.

NOTE: For Multicast models, receivers two, three and four do not come with an IR Ex tender. Additional IR E xtenders

(HDS-IRE) can be purchased separately; visit peerless-av.com for more inform ation.

Step 6 Turn on your display device (TV, monitor, projector, etc.).

Step 3 Connect the display device (TV, monitor, projector, etc.)

to the Receiver.

Step 5 Power-up the HD Flow Pro Devices.

1. Plug in the power adapter for the Transmitter and the Receiver to nearby

available power outlets.

2. Plug in the power adapter end to the Transmitter and then to the Receiver.

3. The units will automatically turn-on. The average power-on/sync time

is approximately t wo minutes.

What’s in the Box

Installation and Setup

Troubleshooting Tips

Tip The IR window

may be easier to

locate with a direct

light shining on

sections of the

front panel of the

component device.

A small ﬂashlight

works well.

Power/Source

Selection Button

Tip Repeat Steps

3-11 to connect

more than one

Receiver unit

(HDS200-2,

HDS200-3,

HDS200-4).

Step 1 Connect the Transmitter to the source devices

(Blu-ray

™

Disc player, set top box, gaming console, etc.).

Step 9 Turn on the desired source device that is connected to

the Transmitter.

Step 11 Play the source device content and enjoy up to Full HD 1080p

wireless entertainment experience.

• Check the media source resolution. The display device must be able

to support the resolution of the media source that is being streamed.

Utilizing the INFO button will allow you to see the resolution data that

the display device supports. If the display device supports the highest

resolution of 720p but the source device is outputting 1080p content,

the content needs to be down-scaled to the maximum resolution of the

display device, in this case 720p.

Receiver Output Indicator Light Blinks:

• Make sure that your display device, source device and the HD Flow Pro units

are all turned ON and the Receiver is properly connected to the output device.

• Verify that the Receiver is set to the appropriate output port.

• Check the resolution setting of your source device. This may need to be

changed to a resolution supported by the HD Flow Pro unit. Reference

the Resolution Chart in the HD Flow Pro Manual for compatibility.

Reference your source devices’ manual for instruction on changing

the output resolution.

If the above troubleshooting tips do not resolve the issues for a unicast setup,

please reference the Factory Reset Section of the HD Flow Pro Manual. For a

multicast system conﬁguration, please contact Peerless-AV Customer Care at

800-856-2112 for further instruction.

Step 8 Select the output that connects the Receiver to the display using

the Power/Source Selection Button or the provided remote control.

The output indicator light will become solid and the HD Flow logo will

appear on the display device.

Step 10 Select the desired source or device input on the Transmitter

using the Power/Source Selection Button on the remote control.

Transmitter and/or Receiver Indicator Lights are all Blinking:

• The HD Flow Pro units are establishing a connection. It can take

up to two minutes for the HD Flow Pro units to establish a complete

connection. If after two minutes have passed and the units have not

established a connection, unplug the power cable, wait 30 seconds

and reconnect the power supply to the units.

Transmitter or Receiver Power Indicator Light is OFF:

• Check and verify the power supply connection.

Transmitter Input Indicator Light Blinks:

• Make sure that your source device is turned ON and the cable

is properly connected.

• Verify that the Transmitter is set to the appropriate input port.

• Check the resolution from your source device. This may need to

be changed to a resolution supported by the HD Flow Pro Wireless

Multimedia Kit. Reference the Resolution Chart in the HD Flow Pro

Manual for compatibility. Reference your source devices’ manual

for instruction on changing the output resolution.

Receiver Power Indicator Light Blinks:

• Verify that the HD Flow Pro Transmitter and Receiver are within

the recommended range of 131 feet. Physical obstructions such as

walls, ﬂoors and ceilings between the Transmitter and Receiver may

decrease the strength of the connection signal and reduce the overall

transmission range.

If a connection has been established and the HD Flow logo can be seen

on the display device, but content is not playing:

• Make sure that the input/output cables are properly connected.

• Verify that the Transmitter is set to the appropriate input port.

Warning Do not place the HD Flow

Pro units near other devices that

emit excessive amounts of heat.

Increased temperatures may

cause the HD Flow Pro Transmitter

or Receiver unit to malfunction

or stop working.

tthdi l d i (TV it j t t)

teps

ect

Quick Start Guide for HD Flow Pro Wireless Multimedia Kit - LIT-090 6

Power/Source

Selection Button

HD Flow™ is a trademark of I Do It, LTD. Other parties’ marks are the proper ty of their res pective own ers. hdﬂow.com

Quick Start Guide

PRO WIRELESS MULTIMEDIA KIT

Model No. HDS200 (-2, -3, -4)

READY

Additional Wireless Components

wireless transmitter (1)

(180-1202)

vga to rca adapter (1)

(180-1006)

remote (1)

(180-1207)

ir ﬂ asher (1)

(180-1009)

plastic stand (1)

(180-1205)

instruction sheet (1)

(180-9023)

12v power adapter (1)

(180-1004)

3v battery (1)

(180-0008)

install guide (1)

(LIT-0905)

hdmi cable (2)

(600-0234)

1 2 3 4 5 6 7 8 9 10 ... 18 19

Comments to this Manuals

No comments

Peerless-av WL-SR560M-200 - Installation User Manual Page 5

Comments to this Manuals

Related products and manuals for Monitors Peerless-av WL-SR560M-200 - Installation